Living Room Lighting

In the Living room, try to use different light sources in order to create a more interesting lighting effect. Table lamps placed around the room can help to give a more spacious feeling. Illuminate pictures or bookcases with picture lights or spot lights. Wall and ceiling lights on a dimmer switch can change the level of illumination, with the need to alter the other light sources. Wall uplighters can give an indirect light which can help to create a dramatic effect. Floor standing Lamps can be used in areas where it may be difficult to install wall lights or table lamps. They can also have a flexible arm for reading.

Bathroom Lighting

Great care must be taken when choosing bathroom lighting as there are strict regulations concerning the type of light fitting that may be used. The following information is intended as a guide. If in any doubt, seek the advice of a qualified Electrician.

Bathrooms are split into the following zones:

Zone 1 is the area above the bath to a height of 2.25m. This zone has a minimum rating of IP44. Therefore any light fitting installed in this zone must have an IP44 rating. Also if the light fitting is 240v, it must be protected by a 30ma RCD.

Zone 2 is the area stretching 0.6m outside the bath perimeter to a height of 2.25m. Again a light fitting with a minimum rating of IP44 is required. the area around the basin should also be considered as zone 2.

Zone 3 is anywhere outside of zones 1 and 2 and generally no IP rating is required

Bedroom Lighting

Although general illumination will be required. Try to vary the level of light, either by using wall uplighters on a seperate switch in order to change the mood of the room.Some sort of bedside lamp is useful, especially if your partner has to rise at a different time.Also useful for reading.